Total: 0,00$
Total: 0,00$

ONDULEUR Elite650 PRO

Tension d’entrée : 220V
Tension de sortie : 220V
650VA/390W
Autonomie : 10mins à 18mins (Selon la charge)
Courant de charge Environ 1A en mode normal
Protection contre les surcharges > 14.5V +/- 0.2V arrêt de charge
<13.5V +/- 0.5V Recharge

SKU: ONDU01 Category: Tag:

Description

Input voltage 220VAC
Input frequency 50Hz
Input phase Single phase
Input socket With Fuse
Cold Start (0 to 100% load) Press the ON/OFF switch
Input range (220V) 140V-300V
Rating output (VA). 650VA
Rating output (W). 390W
Rating output (W). Battery mode(simulated sine wave),
AC mode (sine wave)
Power factor 0.6
Rating voltage 220V
Output range 220Vac-7%+15% ( in battary mode )
Rear Output Socket 2xUniversal — Battery backup
Transfer time TYPICAL 4-8 ms
Communication Interface NIL
Rating frequency 50Hz
Output Frequency Line-mode Synchronize with the Utility
Battery mode 50 Hz±1Hz
Output Frequency Line Mode Synchronize with the utility
Short Circuit Protection Line Mode FUSE & firmware protection
Battery Mode Software protection controlled by firmware
Overload Protection Line Mode 110%+-5% (Go to fault mode after 5 minutes),
120%+-5% (Go to fault mode immediately)
Battery Mode 110%+-5% (Shutdown after 5 minutes)
120%+-5% (Shut down immediately)
Rating frequency 12V/8.2AH x 1
Backup Tim — Typical 10mins to 18mins
(depending on load)
Charge Current About 1A at normal mode
Over Charge Protection >14.5V +/- 0.2V stop charging
<13.5V +/- 0.5V Recharge
Weight 5.6kg +/- 0.3Kg
Dimension 390x 145 x 220 (mm)
Master Carton 45.5 x 40 x 23.5 (cm) (4pcs)

Additional information

Weight 0,1 kg
Dimensions 500 × 600 cm

Reviews

There are no reviews yet.

Be the first to review “ONDULEUR Elite650 PRO”

Your email address will not be published. Required fields are marked *

You may also like…